• česky
  • english

RIV/00216305:26210/10:PU88302 - Novel modifications of Effervescent Atomizer, Performance, Advantages and Drawbacks (2010)

Údaje o výsledku
Identifikační kódRIV/00216305:26210/10:PU88302
Název v původním jazyceNovel modifications of Effervescent Atomizer, Performance, Advantages and Drawbacks
DruhD - Článek ve sborníku
Jazykeng - angličtina
OborBK - Mechanika tekutin
Rok uplatnění2010
Kód důvěrnosti údajůS - Úplné a pravdivé údaje nepodléhající ochraně podle zvláštních právních předpisů
Počet výskytů výsledku2
Tvůrci výsledku
Počet tvůrců celkem2
Počet domácích tvůrců2
TvůrceJedelský Jan (státní příslušnost: CZ - Česká republika; A - domácí tvůrce; G - garant výsledku)
TvůrceJícha Miroslav (státní příslušnost: CZ - Česká republika; A - domácí tvůrce)
Údaje blíže specifikující výsledek
Popis v původním jazyceIn this work we studied a single-hole effervescent atomizer spraying light heating oil with air as an atomising medium in the "outside-in" gas injection configuration. We focused on modification of geometry of the atomizer exit section. Two atomizers, one with moderate, and one with intense helical swirler in front of the exit orifice were designed to expand the spray cone angle by a swirl of the gas-liquid mixture. Performance of the atomizer modifications were compared with a plain-orifice atomizer. An experimental study of atomization process was made on cold test bench. Swirling the mixture led to a significant increase of the spray cone angle at low gas to liquid ratio by mass (GLR). An increase of the gas mass fraction in the mixture inhibits the swirl action on the spray cone expansion. The swirl effect diminishes with GLR rising above 15 %. Another two atomizers were designed with aim to reduce droplet size on the spray edge: an atomizer with secondary air at the exit orifice and an atomizer w
Klíčová slovaEffervescent Atomizer, spray, droplet size, spray cone
Název sborníkuProceedings of 23rd European Conference on Liquid Atomization and Spray Systems
ISBN978-80-7399-997-1
Počet stran výsledku5
Název nakladateleTribun EU
Místo vydáníBrno
Místo konání akceBrno
Datum zahájení akce6.9.2010
Typ akce podle státní příslušnoti účastníkůEUR - Evropská
Údaje o tomto záznamu o výsledku
PředkladatelVysoké učení technické v Brně / Fakulta strojního inženýrství
DodavatelMSM - Ministerstvo školství, mládeže a tělovýchovy (MŠMT)
Rok sběru2011
Systémové označení dodávky datRIV11-MSM-26210___/01:1
Datum dodání30.5.2011
SpecifikaceRIV/00216305:26210/10:PU88302!RIV11-MSM-26210___
Kontrolní kód[A241FE206393]
Další výskyty tohoto výsledku od stejného předkladatele
Dodáno GA ČR v roce 2011Záznam s identifikačním kódem RIV/00216305:26210/10:PU88302 v dodávce dat RIV11-GA0-26210___/01:1
Odkazy na výzkumné aktivity, při jejichž řešení výsledek vznikl
ProjektED0002/01/01 - NETME Centre (Nové technologie pro strojírenství) (2009-2013, MSM/ED)
ProjektGA101/06/0750 - Effervescent dvoumediové trysky s vnitřním směšováním (2006-2008, GA0/GA)
S - Specifický výzkum na vysokých školách